August 5, 2026

Reading EPA 2020 Efficiency Ratings Without the Marketing Fog

Grams per hour, HHV versus LHV, and why the biggest number on the box is rarely the one that matters. A short guide to stove efficiency claims.

Two stoves can both be “EPA certified” and still differ by 20% in real-world wood consumption. Here is how to read the numbers rather than the badge.

What the EPA regulates

Certification limits particulate emissions in grams per hour (g/hr). Non-catalytic wood stoves must test at or below 2.0 g/hr; catalytic and pellet appliances have their own limits. Lower is cleaner, but it does not by itself mean lower fuel bills.

The efficiency number you want

Look for overall efficiency (HHV) in the certified test report — usually 60–80%. Some marketing uses LHV efficiency, which is always several points higher than HHV for the same stove. Comparing an LHV figure to an HHV figure is comparing apples to a very flattering orange.

Real-world efficiency

Test labs burn at steady-state with ideal fuel. In a house, efficiency depends on how you run the appliance: a stove run hot and clean beats a more efficient model run choked and smoky every time. Expect real performance to sit 5–10 points below the label.

What to actually compare

  • EPA g/hr and the certified efficiency (HHV) from the test report.
  • Firebox size in cubic feet — the real determinant of how much heat you can release.
  • Log length, measured against the wood you can actually buy.
  • Whether the bypass and gaskets are serviceable, because a leaking door ruins efficiency faster than any design flaw.

Ignore

“Heats up to 3,000 sq ft” claims on the box. Those numbers come from a marketing department, not a test lab. Use the 25–35 BTU per square foot rule and size from the room you are actually heating.

Written by admin Efficiency

Leave a comment